Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Las Vegas
Metal roofing in Las Vegas is a different animal than it is anywhere near a coast. Here the enemy isn’t salt air – it’s 300-plus days of sun, summer highs that sit above 105°F for weeks, and the sudden monsoon microbursts that roll through between July and September. If your panels, fasteners, and clips weren’t specified for that, you’ll find out in five or six years, not twenty. We know this valley block by block, and we answer the phone when you call (844) 797-9455.
Why Shepherd & Sons Roofing Whitney Is Las Vegas’s Preferred Metal Roofing Company
We’ve been standing behind our work in this part of Nevada since 1996, and the name on the truck is the name on the license. That matters when a storm rolls through and the company that quoted you last spring is working out of a hotel room in another state.
A live person answers our phone 24/7 – a real person, not a call center or voicemail. When you call about a metal roof in Las Vegas, you get an answer and an honest walkthrough of what’s likely wrong and what it’ll cost. We’ll show you the deck photos before we talk money.
Our technicians have up to 30 years of experience, and every job is backed by our written 90-Day Done Right Promise: if it’s not done right, we make it right. One call brings us back.
We’re locally owned and owner-operated with a published address and license number, and we install products from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. Name the panel or the finish and we’ve likely set it.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Las Vegas
Standing Seam Metal Roof
Standing seam is the gold standard for a Las Vegas home that takes a beating from the sun. The panels run with raised seams and concealed clips, so there are no exposed fasteners to back out through daily thermal swing. On the northwest side – Summerlin, the 89144 and 89149 ZIPs – dark panels on tile subdivisions soak up enormous solar load, which is why the finish spec and clip spacing matter more than the color you fall in love with.

Metal Roof Repair
Most of the repair calls we field in Las Vegas come after a monsoon microburst peels back flashing or lifts a panel edge, or after a homeowner spots rust streaks and chalky paint on an older metal roof. The usual culprit is a panel installed with exposed fasteners and a lower-grade finish where UV and 100°F-plus daily swings have backed out the screws and dried out the washer gaskets. A proper repair checks the decking, existing underlayment, penetrations and valleys, then re-secures everything with long-life gasketed or concealed-clip hardware and seals the drip edge and fascia to handle wind-driven rain.

Corrugated Metal Roofing
Corrugated still has its place on shops, sheds, and value-minded homes around Las Vegas, and it performs well when it’s installed right. The difference is in the fastener pattern and the finish – a cheaper corrugated panel with a light coating will chalk and fade long before the steel underneath gives out. We spec the finish for desert UV, not for a coastal market’s corrosion needs.

Aluminum & Steel Roofing
Aluminum and steel are both solid choices in Las Vegas, and the right one depends on your house, your budget, and how the panel will be fastened. Steel brings strength and a paint finish that holds up well when it’s the right grade; aluminum is lighter and won’t rust, which matters around pool cages and patio covers where splash and splash-back are constant.
Trusted Brands We Service in Las Vegas
We work with the panel manufacturers and finish systems you’ll actually find on homes across the valley – GAF, CertainTeed, Owens Corning, and IKO are names you’ll see on our bids. We don’t claim to stock parts locally, and we won’t tell you we have a warehouse full of panels waiting. What we do is get you an honest written quote and a fast turnaround on the material you settle on, and we stand behind what gets installed.
See the difference
Before
After
Before
After
Before
AfterCommon Metal Roofing Problems We See in Las Vegas Homes
- Chalky, faded paint under desert UV. Three hundred days of sun will cook a factory finish years early, especially on dark panels that absorb more heat. When the paint chalks, the panel is still structurally fine but the roof starts to look its age long before it should.
- Backed-out screws and dried gaskets. Daily thermal expansion and contraction on exposed-fastener systems slowly walk the screws out and dry out the washer gaskets. Every one of those is a future leak point.
- Monsoon microbursts getting under lifted edges. A July gust finds any weak flashing or lifted panel edge in the northwest valley. Proper clip spacing and sealed penetrations are what resist the wind, not the panel alone.
- Failing underlayment on older tile-roof homes. On Summerlin’s 1990s and 2000s tile subdivisions, the original underlayment is now at or past its 20 – 25 year lifespan, and a metal retrofit has to account for the deck below.
Pricing for Metal Roofing in Las Vegas, NV
Here are real numbers for the Las Vegas market, not a shrug and “it depends.” A typical standing seam metal roof on a Las Vegas home runs about $10 to $18 per square foot installed, which lands most single-family jobs between $18,000 and $40,000 depending on square footage and panel complexity. Corrugated metal is the more affordable option at roughly $6 to $10 per square foot installed. A metal roof repair – re-securing panels, replacing fasteners and gaskets, or fixing flashing after a monsoon – usually runs $350 to $1,800. Metal roof coating on an existing metal roof runs about $2 to $5 per square foot.
The price gap between a cheap spec and a proper one is real, and the cheap one usually costs more within a decade once the finish chalks and the fasteners start backing out. We give free second opinions on any written estimate, and no trip charge inside our own county. Call (844) 797-9455 for an exact quote.
We Also Serve Cities Near Las Vegas
We work metal roofs across the valley, not just inside the city limits. That means Winchester, North Las Vegas, Sunrise Manor, and Paradise too. If you’re just outside Las Vegas proper, we’ll still come out. See our Las Vegas page for the wider picture, or ask about our Metal Roofing team directly.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Las Vegas
Yes, and often it’s the smarter long-term call. Those tile subdivisions have original underlayment from the 1990s and 2000s that’s now at or past its lifespan, and a metal retrofit can solve the underlayment problem and the heat problem in one shot. HOA architectural committees in villages like The Trails and Red Rock still have a say, so expect approval steps. Call (844) 797-9455 and we’ll walk you through what your HOA will require.
Standing seam hides the fasteners behind raised seams and clips, so there’s nothing exposed for UV and daily heat cycling to back out. Corrugated systems use exposed screws that walk out over time and need re-securing. The price gap is roughly $4 to $8 per square foot installed, and the standing seam usually pays that back by not needing the fasteners and gaskets redone in eight to ten years.
Yes, if the panel was finished with a lower-grade coating. Intense desert UV and 105°F-plus summer heat will chalk and fade that finish decades early, and it happens fastest on dark panels that soak up more solar load. A proper Kynar 500-type finish holds up far better here. Ask any bidder what finish is on the panel before you compare price.
Compare the finish spec, the fastener or clip system, the panel gauge, and the flashing and penetration details – not just the total. A bid that’s thousands cheaper usually means a lighter finish, an exposed-fastener system, or bare-minimum flashing. Ask to see deck photos before money changes hands, and get a second opinion free from us. Call (844) 797-9455.
Sometimes, but it depends on the deck and the existing underlayment. In most northwest valley homes, the smart move is to pull the tile, inspect the deck, replace the underlayment, and then set the metal. Doing it right means the new roof outlasts the old one by decades. Call us for a free estimate and we’ll tell you which route fits your house.
Written by the team at Shepherd & Sons Roofing Whitney.