Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Metal Roofing Across Sunrise Manor
Metal roofing in Sunrise Manor isn’t a rain decision. It’s a heat decision. You live on the east side of the Las Vegas Valley, where summer afternoons push past 110°F and a dark metal panel sitting in full sun can hit 160°F before lunch. That changes what kind of metal roof makes sense on your house, your shop, or that ADU behind the house. It also changes how we scope the job before anyone quotes you a number.
We know this side of town. Sunrise Manor is unincorporated Clark County, not city of Las Vegas, and a lot of the parcels here are acreage – gravel drives, well and septic, detached buildings. That’s a different kind of roofing than a cul-de-sac tract home, and it needs to be priced that way. Call (844) 797-9455 and a real person picks up. Free estimates, a written second opinion on any bid you’ve already got, and no trip charge inside our own county.
Why Shepherd & Sons Roofing Whitney Is Sunrise Manor’s Preferred Metal Roofing Company
We’re locally owned and owner-operated. Same address since 1996. That matters to people in Sunrise Manor who’ve already watched one out-of-state crew roll through after a monsoon, take a deposit, and disappear. When you call, you get a live person, not a call center and not a voicemail box that fills up. The name on the truck is the name on the license, and the license number is published – you can look it up.
Our metal roofing team has worked the older east-side tracts and the acreage parcels off the main corridors alike, and we’ve seen what two decades of desert sun does to a roof. Our technicians have up to 30 years of experience, and every roofing job we do is backed by the written 90-Day Done Right Promise. If it’s not done right, one call brings Bill back to make it right.
Response time to Sunrise Manor is quick – it’s right in our service area, so we’re not crossing the Valley to get to you. If you’ve got a leak after a monsoon microburst, call and we’ll be there. If you’re planning a metal retrofit on a shop or a house, we’ll schedule a time that works for you and show you the deck photos before we talk money.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Metal Roofing Services in Sunrise Manor
Standing Seam Metal Roof
Standing seam is the go-to for Sunrise Manor homes and outbuildings that need to shed heat and last. The raised seams and concealed fasteners mean fewer penetrations for monsoon dust to pack into, and the panels run long, which cuts down on seams. On an open, shade-free lot, we spec underlayment rated for thermal cycling, not rain, because that’s what’s actually cooking up there.

Metal Shingle Roofing
If you want the look of shingle without the brittleness, metal shingle gives you that on the pitched sections of a Sunrise Manor house. A lot of 89110-era homes have pitched porch or garage roofs that were shingled in the 1990s and are already cracked and curling from 110°F summers. Metal shingle goes over a properly prepped deck and holds up to the heat far better.

Corrugated Metal Roofing
Corrugated is the workhorse for detached shops, sheds, and outbuildings on Sunrise Manor acreage. It’s affordable, it goes on fast, and it handles the thermal swing from a cold winter morning to a hot afternoon without complaint. We measure the run in squares and check access before we order, because corrugated panels are cut to length and you can’t trim them short on site.

Aluminum & Steel Roofing
Both aluminum and steel work in Sunrise Manor, but they behave differently. Aluminum handles the desert heat and won’t rust, which matters on lots where dust and occasional rain sit against the panels. Steel is stronger and holds a finish longer. We’ll walk you through which fits your building and your budget instead of pushing whichever one we happen to favor.
We also do metal roof repair and metal roof coatings when a full replacement isn’t the right call yet. Those are often the honest answer on an older flat-roof outbuilding where the structure is sound but the top layer is tired.
Trusted Brands We Service in Sunrise Manor
We install products from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. Name the shingle or panel and we’ve likely set it. We don’t stock parts – we order what your roof actually needs and get it to your Sunrise Manor property without you chasing it down. Fast turnaround on the order, and no upselling you into a brand that doesn’t fit the building. If you’ve already got a bid with a specific product on it, bring it to us for a free second opinion.
Common Metal Roofing Problems We See in Sunrise Manor Homes
- Penetration and parapet failures on old flat-roof outbuildings. Standing seam over an old flat roof fails first where monsoon wind-driven dust packs against the seams and traps the occasional rain against the flashing. The fix is rebuilding the transitions, not just covering them.
- Rotted decking under 1990s shingle sections. A metal retrofit on an 89110 tract home often uncovers decking that’s gone soft under the old shingle layer after two decades of 110°F summers. That decking has to be replaced before any underlayment goes down.
- Swamper-cooler curbs that were never flashed right. A cooler curb that leaked under the old roof will leak under the new one too if it isn’t rebuilt. We rebuild the curb and its flashing rather than covering it and hoping.
- Access problems on acreage lots. Long gravel pulls and narrow gates mean a full-size delivery truck and material trailer can’t always reach a detached shop. That forces a staged drop point, hand-hauling, or a crane, and it adds real labor to the square count.
Pricing for Metal Roofing in Sunrise Manor, NV
Here’s what metal roofing actually runs on this side of the Valley. A typical standing seam metal roof on a Sunrise Manor home runs $11 to $18 per square foot installed. Corrugated metal on a detached shop or outbuilding runs $6 to $11 per square foot. Metal roof repair for a leak at a penetration or seam runs $350 to $1,200 depending on what’s underneath. Metal roof coating on a flat outbuilding roof runs $2.50 to $4.50 per square foot. What moves the number: the square count, whether the decking needs replacing, how far the material has to be hauled to reach the building, and whether a crane is needed past a well or septic setback. We measure in squares and give you the line-item quote in writing, so you know the number before anyone touches your roof.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Sunrise Manor
We cover the east side and the surrounding Valley. If you’re in Whitney, Winchester, Las Vegas, or North Las Vegas, we can get to you too. Sunrise Manor sits in unincorporated Clark County, so permitting runs through the county here – not the city – and that’s a distinction that matters when you’re scoping a job. Call and we’ll sort out which jurisdiction your parcel falls under and how our Metal Roofing team handles it.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Metal Roofing in Sunrise Manor
No. Sunrise Manor is unincorporated Clark County, so permitting runs through the county, not the city of Las Vegas. That changes the process slightly – the county has its own review path and inspection schedule – and we confirm that path before any steel is ordered. Call (844) 797-9455 and we’ll tell you exactly what your parcel needs.
Well and septic setbacks determine where a delivery truck, material trailer, or crane can stage on your lot, which can change the labor on the job. On acreage parcels we check those setbacks first, then figure out whether panels come by truck to a drop point or get hand-hauled to the building pad. Call us for a free estimate and we’ll scope it out on site.
We measure the run in squares, check how the panels will reach the building past the gate and the septic, and confirm the county permit path before we quote. On east-side acreage parcels, a detached shop or shop-turned-ADU usually needs a standing seam or corrugated lid over the original flat or aging roof, and the first problem is access. A full-size delivery truck and material trailer often can’t navigate the long gravel pulls and gate widths, so we stage a drop point and factor the hand-hauling into the price. Call (844) 797-9455 for an exact quote – estimates are free.
Because the old decking under a 1990s shingle section has often gone soft after two decades of 110°F summers and occasional monsoon rain. That rotted decking has to be replaced before the underlayment goes down – covering it and hoping isn’t a repair. We’ll show you the deck photos before we talk money so you can see exactly what needs replacing. Call for a free estimate.
Underlayment and ventilation rated for thermal cycling, not rainfall. This is a shade-free, aggressively sun-baked part of the Valley, and long panel runs on a dark metal roof push surface temps past 160°F. The underlayment has to handle that swing, and the attic ventilation has to move the heat out. Get those right and the panel finish lasts. Call (844) 797-9455 and we’ll walk you through the spec for your building – single-story stucco tract home or detached shop on acreage.
Where the Sunrisse Manor Metal Roofing Job Actually Starts
Here’s what most generic metal roofing pages skip. On an acreage parcel in Sunrise Manor, the scoping questions aren’t HOA color approvals. They’re where the well and septic sit relative to the structure, and how a truck and trailer reach the building pad. Sunrise Manor sits in unincorporated Clark County, so a metal roof on one of these lots goes through county permitting, and the paperwork follows the parcel, not a tract map. On east-side acreage, a detached shop or shop-turned-ADU usually needs a standing seam or corrugated metal lid over the original flat or aging roof, and the first problem the crew hits is access – long gravel pulls and gate widths that a full-size delivery truck and material trailer can’t navigate without staging a drop point. A qualified local pro measures the run in squares, checks how the panels will be craned or hand-hauled past the well and septic setbacks, and confirms the county permit path before ordering any steel. Panel lengths are cut to the building and can’t be trimmed short on site, so the order has to be right the first time. That’s why we scope access and setbacks before we quote, not after you’ve signed.
Contact Us for Metal Roofing in Sunrise Manor
Whether you’ve got a flat-roof shop that needs a metal lid, a 89110 tract home with a cooled-out pitched section, or a leak at a cooler curb you can’t track down, call (844) 797-9455 for a free estimate. A live person answers 24/7, including nights and weekends after a storm. We’ll measure in squares, show you the deck photos, and give you the line-item quote in writing – no trip charge inside our own county, senior and veteran 10% discount available, and $40 off any repair over $200. Ask anyone on your street who did the roof. Sunrise Manor is our neighborhood too.
Written by the team at Shepherd & Sons Roofing Whitney.