Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Gutters & Accessories Across Sunrise Manor
Sunrise Manor gutters don’t handle rain the way gutters on a tree-lined street in the Midwest do. Here, on the Valley’s east side, they spend most of the year as dust trays and only prove themselves during a monsoon microburst. That’s why the call we get most from 89110 homeowners isn’t “my gutter is full” – it’s a brown stain running down the stucco under a parapet after a July storm, and nobody saw it coming until the water was already behind the fascia. We know these tract homes and their flat and low-slope roofs well, and a live person answers our line 24/7 at (844) 797-9455 when something is leaking. Get a free estimate before anything is touched.
Why Shepherd & Sons Roofing Whitney Is Sunrise Manor’s Preferred Gutters & Accessories Company
Sunrise Manor sits in unincorporated Clark County, so the permitting, the housing stock, and the way these roofs shed (or don’t shed) water all look different from the newer parts of the Valley. We’ve worked the older single-story stucco tracts here long enough to know that a gutter problem is usually a scupper or parapet-seam problem first, and that the fascia board behind the gutter is often the real casualty. Homeowners in Sunrise Manor call us back because we show you the deck and the fascia before we talk price, and we put honest numbers on paper up front.
Response to Sunrise Manor is quick – this is our own backyard, and there’s no trip charge inside our own county. Every roofing and gutter job we do carries our written 90-Day Done Right Promise. If something isn’t right, one call brings us back. That’s not a slogan; it’s a sentence on your paperwork. And we install products from Owens Corning, IKO, Atlas, Tamko and more, so the fasteners and hangers we hang match the roof above them.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Gutters & Accessories Services in Sunrise Manor
We handle the whole run here, from the fascia outward, and we scope it around how these Sunrise Manor roofs actually behave rather than a standard up-and-over template.
Seamless Gutters in Sunrise Manor
On these older east-side homes, a seam is just one more place for dust to collect and for the sun to work on a bead of sealant. We run seamless gutter on site so the run from the high corner to the downspout is one piece. On the low-slope sections that dominate Sunrise Manor, seamless runs work hand in hand with the scupper and the drip edge; we verify the underlayment edge at the roof-to-gutter transition before we hang a single hanger.
Fascia Repair in Sunrise Manor
The brown stain below a parapet almost always means water backed up under the drip edge and tracked behind the fascia. We trace the path rather than paint over the stain – checking the scupper opening, re-flashing penetrations like a swamp-cooler curb that was never flashed right, then replacing the rotted fascia board. On 89110-era stucco homes, a sideways-tracking leak from an unflashed rooftop penetration is the most common hidden culprit we find.
Gutter Guards in Sunrise Manor
Guards here aren’t about leaves the way they are in wetter climates; they’re about keeping monsoon wind-driven dust and grit out of the trough so a microburst can actually drain instead of clogging at the worst moment. A properly fitted guard over a seamless run keeps the scupper path clear. We size the guard to your gutter and your downspout load, not a one-size box off a shelf.
Downspout Repair in Sunrise Manor
Downspout fasteners and sealant take a beating from 110°F-plus thermal cycling here – UV brittles the hanger, the bracket screws work loose, and the run sags or pulls away long before ice or heavy rain would ever stress it. We re-hang, re-seal, and re-size the discharge so the burst of water from your flat roof gets sent away from the foundation and the open lot. Ask how many squares you’ve got draining and we’ll size to that number.
Trusted Brands We Service in Sunrise Manor
We set materials from Owens Corning, IKO, Atlas, Tamko, GAF, CertainTeed and Boral, and we don’t claim to stock parts locally – nobody honestly does at this scale. Instead, we match the right product to your Sunrise Manor roof and get it to the job fast. If you’ve got a brand name on your shingles or a particular gutter profile you want, name it and we’ve likely set it. We’ll show you the actual pieces before we hang them.
See the difference
Before
After
Before
After
Before
AfterCommon Gutters & Accessories Problems We See in Sunrise Manor Homes
- Dust-loaded gutters and clogged scuppers. These only reveal themselves during a monsoon microburst. Water backs up under the drip edge and runs down the fascia, and you find out weeks later from a stain.
- Fascia and soffit rot behind the gutter on 89110 stucco homes. A swamp-cooler curb or rooftop penetration that was never flashed correctly lets water track sideways. The gutter looks fine; the board behind it is gone.
- UV-brittled hangers, sealant and downspout fasteners. Two decades of 110°F summers and thermal cycling sag or detach the run at the bracket. It’s sun, not ice, that fails these.
- Brittle 1990s-era eave shingles. On pitched sections, the starter strip at the eave often fails at the same time as the gutter, so the repair gets scoped together.
Pricing for Gutters & Accessories in Sunrise Manor, NV
Here’s the honest range for this market, not a “call for pricing” dodge. A typical seamless gutter run in Sunrise Manor runs roughly $7 – $12 per linear foot installed, so a common 120-foot run lands around $850 – $1,450. Fascia repair usually runs $12 – $28 per linear foot depending on how much rot we expose once the gutter comes down. Gutter guards run about $4 – $9 per linear foot on top of the run. Downspout re-hang and re-seal is a smaller job, often $150 – $400. What moves the number: how much fascia is actually gone, whether a scupper or parapet seam needs re-flashing, downspout count and size, and access on a larger lot with a detached shop or ADU. We scope all of it before we quote – free estimate, and we pull the Clark County permits the job needs.
We Also Serve Cities Near Sunrise Manor
Sunrise Manor is part of the east-valley work we do every week, alongside Sunrise Manor and the towns around it. We also serve Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re on the east side, you’re in our own county, so there’s no trip charge.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gutters & Accessories in Sunrise Manor
Because on the flat and low-slope roofs that dominate Sunrise Manor, the scupper and the parapet seam are where the water actually fails first. With near-zero annual rainfall, gutters sit as dust trays most of the year; the scupper only gets tested when a microburst dumps water fast enough to pond on the roof and send it down the parapet. That’s why cleanout access and downspout sizing matter more here than raw gutter volume. Call (844) 797-9455 and we’ll trace the actual path, not just look at the trough.
No, and it’s a real scoping difference. A flat or low-slope roof sheds through scuppers and downspouts, so the fall is built into the scupper and downspout path rather than the gutter pitch. What you size for here is burst volume and clear passage, not a long gravity slope. We check the scupper opening and downspout count before quoting on any Sunrise Manor flat-roof home.
It depends on whether the job touches the roof assembly or structure. Sunrise Manor is unincorporated, so permitting runs through Clark County rather than a city. Straight gutter replacement usually doesn’t require one; fascia repair that reaches into the roof edge or re-flashing a penetration often does. We tell you up front what your job needs and pull the permit when it’s required. Call for a free estimate and we’ll confirm it for your address.
Yes, but for a different reason than most guard sales pitches give. Here the fight is monsoon wind-driven dust and grit loading the trough, not leaves. A guard that keeps grit out lets a microburst drain cleanly instead of clogging the scupper at the worst moment. We fit the guard to your gutter and downspout load, so it actually helps. Ask us to show you the guard profile before you commit.
More roof area, more downspouts, and more than one discharge path, so the scoping runs longer than a single tract house. We walk the lot, count the drains feeding each roof, check grading and where water discharges, and verify the outbuilding penetrations are flashed right. That changes the linear footage, the downspout count and the access time, so it changes the number. Call (844) 797-9455 for a free estimate with a written, line-item quote.
Written by the team at Shepherd & Sons Roofing Whitney.