Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Trusted Metal Roofing for Whitney Homeowners
If you’ve priced a metal roof in Whitney lately, you’ve probably heard numbers all over the map. Here’s what matters most: metal is the one roofing material that holds up to the high-desert sun, the summer heat that bakes rooftops past 150 degrees, and the wind that funnels through the valley without asking permission. Our technicians have up to 30 years of experience setting standing seam, metal shingle, and corrugated panels on homes across the east valley, and we install products from Owens Corning, IKO, Atlas, and Tamko when the job calls for it. Whitney sits in a stretch where afternoon gusts and monsoon dust do real work on a roof, and metal handles it better than asphalt ever will. Call (844) 797-9455 and a live person picks up, day or night.
What Our Metal Roofing Service Includes
We handle metal roofing from the first measurement to the final walk-through. Every job starts with a look at your deck and your current roof, because a metal panel is only as good as what’s underneath it. Here’s what each part of the service covers.
Standing Seam Metal Roof
Standing seam is the concealed-fastener panel system with raised ribs running down the slope, which is why it sheds water and dust so well in this climate. You want it when you’re replacing a roof for the long haul and don’t want exposed screws backing out in the heat. We measure the roof in squares, check the deck for soft spots, and set panels with the clip spacing the manufacturer calls for so the wind rating actually holds.

Metal Shingle Roofing
Metal shingles give you the look of a traditional roof with the durability of steel or aluminum underneath. They make sense when you want metal performance but your neighborhood or HOA expects a shingled profile. We help you match the pitch and color to the house, then install over a properly prepped deck with the underlayment that suits Whitney’s dry, hot conditions.

Corrugated Metal Roofing
Corrugated panels are the workhorse option – affordable, fast to install, and common on outbuildings, porches, and homes where budget matters. You reach for it when you need solid coverage without the price of standing seam. We check the fastening pattern carefully, because on a corrugated roof the screws and washers are what keep the wind from lifting a panel.

Aluminum & Steel Roofing
Aluminum and steel are the two metals we set most often, and each has a place. Aluminum resists rust well and stays lighter on the structure; steel is stronger and takes paint and coatings beautifully. We help you pick based on your budget, the roof’s pitch, and how close you are to the valley’s dust and wind exposure. Both are installed to manufacturer spec so the warranty stays intact.
Metal Roof Repair
Not every metal roof needs replacing – sometimes it’s a lifted panel, a backed-out fastener, or a seam that’s working loose. You call for repair when you spot a leak, a dent, or a panel that’s rattling in the wind. We find the actual source before we touch anything, then fix it right rather than smearing sealant over the symptom.
Metal Roof Coating
A coating refreshes an older metal roof and helps it reflect the sun instead of soaking up heat. It’s worth considering when the panels are structurally sound but faded, chalky, or letting heat through. We clean and prep the surface properly first, because a coating only lasts when it’s applied over a surface that’s ready for it.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Brands We Service for Metal Roofing
We work with the panel and component brands that hold up in southern Nevada, and we know where each one tends to wear. Owens Corning and IKO products come through our hands often, and we’ve learned their quirks – how their underlayments behave in dry heat, where fasteners tend to loosen over a few summers. Atlas and Tamko are two more we set regularly, and we know the details that keep their warranties valid.
Knowing a brand isn’t the same as knowing your roof. Every Whitney home has its own pitch, sun exposure, and wind load, and we match the material to the house rather than forcing one system onto every job. Whether you have panels from one of those makers or any other brand, we can help you sort out what’s failing and what it’ll take to fix it.
Signs You Need Metal Roofing Right Now
- Panels lifting or rattling in the wind. A loose panel is the first sign fasteners are backing out, and one good gust can turn a small fix into a torn-open roof. Get it looked at before the next wind event rolls through.
- Rust, chalky fading, or peeling paint. Surface breakdown means the protective coating is gone and the metal is exposed to the sun and dust. Left alone, it moves from cosmetic to structural faster than most folks expect.
- Water stains on the ceiling or in the attic. A metal roof leak usually traces back to a seam, a fastener, or a penetration, not the panel itself. Finding the real source early saves you from deck rot and interior damage.
- Dents or hail damage. Even metal takes a hit in a hard storm, and a dented panel can trap water and weaken the seal around it. If you see fresh dents after weather, it’s worth a look.
- An aging asphalt roof you’re tired of replacing. If you’ve been patching shingles every couple of years, metal is often the last roof you’ll put on that house. It’s a bigger upfront number but a longer stretch between replacements.
Our Metal Roofing Process – Step by Step
- 1
Free inspection and second opinion. We get on the roof, photograph the deck and any problem areas, and show you what we found before we talk money. If you already have a written estimate from someone else, we’ll give you a free second opinion on it.
- 2
Written, line-item estimate. You get the number in writing, broken down by material and labor, so you can see exactly what you’re paying for. No vague lump sum, no surprises at the door.
- 3
Deck prep and underlayment. We check the deck for soft spots and repair what needs repairing, then set the underlayment suited to our dry, hot conditions. This step is where a metal roof earns its lifespan.
- 4
Panel installation to spec. We set panels with the clip spacing and fastening pattern the manufacturer requires, because the nailing pattern earns the wind rating, not the panel wrapper. Panels go down square and true so the seams line up and seal.
- 5
Final walk-through and the 90-Day Done Right Promise. We walk the roof with you, show you the finished work, and back every job with our written 90-Day Done Right Promise. If something isn’t right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roofing Cost in Whitney?
Metal roofing in Whitney generally runs higher than asphalt but pays you back over time through longer life and lower cooling load. A typical standing seam metal roof runs roughly $9 to $16 per square foot installed, depending on panel gauge and complexity. Metal shingle roofing lands around $7 to $13 per square foot, and corrugated metal is the budget-friendly end at roughly $4 to $9 per square foot. A metal roof repair like a lifted panel or backed-out fasteners often runs $250 to $800, and a coating job typically falls between $1,200 and $3,500 depending on roof size.
What moves the number: roof pitch and height, how many penetrations and valleys you have, the panel gauge you choose, and whether the deck needs repair underneath. To avoid overpaying, get a written line-item quote and ask any bidder how many squares they counted – the count drives the price, and a low number on the phone often grows at the door. Our free estimate includes the deck inspection, the square count, and the full breakdown so you know the number before anyone touches your roof. Call (844) 797-9455 for an exact quote – estimates are free.
Metal Roofing Near Whitney – Our Service Area
We serve Whitney and the surrounding east valley, including Sunrise Manor, Paradise, Winchester, and the edges of Las Vegas and North Las Vegas. Folks out toward Boulder City and Sandy Valley are on our map too. Most of the valley is a short drive, and we keep the same phone number and the same name on the work whether you’re a few minutes away or out on the edge of the county. See our home page for the full picture of what we do.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Metal Roofing in Whitney
Metal roofing is a roof system made of steel or aluminum panels or shingles instead of asphalt. It’s a strong fit for Whitney because it reflects heat, stands up to wind, and lasts far longer than asphalt in our sun and dust. The main tradeoff is a higher upfront cost, which it tends to earn back over its longer life.
A typical residential metal roof in Whitney takes about three to seven days once materials are on site, depending on roof size and complexity. Larger roofs, steeper pitches, or jobs with deck repair add time. We’ll give you a realistic timeline in your written estimate so you can plan around it.
Expect roughly $9 to $16 per square foot for standing seam, about $7 to $13 for metal shingle, and around $4 to $9 for corrugated, installed. Repairs run about $250 to $800 and coatings about $1,200 to $3,500. Call (844) 797-9455 for an exact quote – estimates are free.
Yes, we set and service Owens Corning and IKO products regularly, along with Atlas and Tamko. We know where each brand’s components wear in dry heat and how to install them so the warranty holds. Whether you have one of those or any other make, we can help.
Yes. A live person answers the phone around the clock, nights and weekends included, so you’ll reach us when a panel lifts or a storm opens a leak. We get out to assess the damage and stop further trouble before we quote the full repair. Call (844) 797-9455 and we’ll sort out the next step.
Every roofing job we do is backed by our written 90-Day Done Right Promise – if it isn’t done right, we make it right. Material warranties come from the manufacturer based on proper installation. If something goes wrong, one call brings us back to make it right.
Clear the driveway and any area where panels and materials will be staged, and move fragile items away from interior walls that may get bumped. Keep pets and vehicles clear of the work zone during the day. We’ll walk you through the specifics before we start so there are no surprises.
Schedule Your Metal Roofing Service in Whitney Today
When you’re ready to price a metal roof in Whitney, call (844) 797-9455 and a real person answers, day or night. You’ll get a written line-item estimate, a free second opinion on any other quotes you’ve gathered, and no trip charge inside our own county. Every job is backed by our 90-Day Done Right Promise. Let’s find out what your roof actually needs.
Written by the team at Shepherd & Sons Roofing Whitney.